VIRO Rides Vega The Best of Two Worlds – UL 2272 Certified

Viro Rides is an electric scooter designed for children. Its main attraction, which has earned it enormous popularity among children, is its particular way of being able to transform from a standing driving vehicle, to one for sitting. Without adding optional attachments, but only by squeezing a few pins and sliding the pieces so that they take the desired shape, that is to say, an authentic transformer!

The equipment can be a bit heavy for the boys and it is not for less because it must maintain structural rigidity in the folding pieces so as not to suffer failures due to premature fatigue. However, it has been proven that children know best how to cope with this type of device, finding a way to make things easier.

To move from stand up scooter mode to seated mode, Viro Rides requires four simple steps, first lean it on the rear wheel and lift the front, release the pin that is located at the junction of the pole with the board and slide the whole board to the top of the pole, as if trying to bring them closer to the handlebars until the safety fits perfectly. Then let it rest on its wheels and on the right side of the front of the board you will find another pin, once operated, you will be able to straighten the pole to the almost vertical position. Once locked in place, the board can be lifted and underneath it you will find a folding platform that unfolds and fits with the bottom of the board once it has been lifted. Finally, on the front wheel are two short arms that fold out to support the front feet.

It’s not really complicated when you have enough practice to do it. Perhaps at first you doubt a little about the procedure but once you have enough practice, everything becomes much easier. The front handlebar has two positions and in the extended option, teenagers may find it somewhat low when driving in stand up mode. Perhaps a longer third position would have been ideal for tall children. However, it is also not uncomfortable to use and as we said at the beginning, the Viro Rides electric scooter is more aimed at children.

Its construction is solid although most of it is made of plastic. It has an accelerator on the handlebars to control speed and a handlebar to operate the brake on the rear wheel. The 100w motor is located in a central position, under the table at the back and has a chain protected by a cover to drive the rear wheel gear. The maximum load capacity of the Viro Rides electric scooter is 120 Lbs. (54.43 Kg), the maximum speed it can reach is 10 mph (16 kph) and its travel range is 6 miles (9.6 kms), after which, it must be connected to the charger for a space of 12 hours to recover the full load.

In summary, Viro Rides is an electric scooter very popular among children and the product of its success is the ability to transform into two different vehicles. It requires some practice to be able to perform the processes fluently to get it from one way to another but it is not something that is difficult to achieve. The handlebars have two positions and it could be somewhat uncomfortable in the stand-up position for a driver who is very tall. It is highly recommended that this one of the parents be present so that you can help your child remove it from the box, read the manual together and teach your child about the procedure to follow and the care to be taken when handling it to avoid accidents.